エストニア衛星 ESTCube-1
2013-02-03


禺画像]
Nation: Estonia
Type/Application: Technology, Earth ofservation
Operator: University of Tartu
Configuration: CubeSat (1U)
Power: Solor cells, batteries
Mass: 1.33 kg
Frequency:  437.250 MHz CW
            437.505 MHz primary downlink
           2401.250 MHz secondary downlink
Launch day: xx.Apr 2013
Launch vehicle: Vega
Launch site: KoELA-1
Mission:
1. Carrier rocket takes the satellite into orbit and deploys it.
2. 5 minutes after deployment the satellite starts up and starts preliminary
   system checks to determine the integrity of the  satellite's hardware.
3. 30 minutes after deployment the radio antennas of the satellite will
   be deployed and communications with the Earth will be made possible.
4. 40 minutes after deployment the satellite's radio beacon will bea
   activated and first messages will be sent back to the Earth (this is
   the first time the satellite's successful launch can be determined)
5. Satellite's beacon will be held active for a couple of days to determine
   satellite's health
6. The satellite will turn on all of its subsystems and will stay in
   standby for commands from the groundstation.
7. The groundstation will communicate with the satellite for diagnostics
   and possible software updates
8. Satellite's rotation will be stabilized and first camera pictures
   will be taken.
9. The main mission will start: the coils within the satellite will
   be used to spin it up and the tether deployment starts.
10.Tether deployment ends, the tether will be electrified and measurements
   will start. The satellite will keep sending telemetry for confirming
   the E-sail effect.
[URL]

コメント(全0件)
コメントをする


記事を書く
powered by ASAHIネット